| Optional parts by Megatech
![MTChassis].jpg (12458 bytes)](MTChassis_small.jpg)
|
Add to cart |
 |
| DuraTrax Bearing Set Mini-Z (7)18.99
![DTXC1386[1].jpg (8335 bytes)](DTXC13861_small.jpg)
|
|
In stock |
|
This is an Optional Twin Turbo Power Booster
for the Kyosho Mini-Z vehicles. This mounts to the top chassis plate with
double-sided servo tape. FEATURES: Power boosts from 10 to 30 Percent depending
on battery type. Works with Forward and Reverse travel. Overloading protection
Unit is in Blue shrink wrap. Prevents damage to motor when Mini-Z is blocked by
an obstruction. Increases braking performance Works with all modified motors
that do not exceed 38,000 RPM. Pre-installed and labeled wires Five minute
installation INCLUDES: One Twin Turbo Unit One piece of double-sided tape
REQUIRES: Installation onto Mini-Z (no solder is required) SPECS: Input voltage:
4.8V - 6.0V Output amps: 20A Internal resistance: 0.75 ohms On sale now 42.99
|
|
In stock |
| Megatech Delrin Ball Diff Assembly
38.99 This is the
Ball Diff Assembly by Megatech. This is for the Kyosho Mini-Z.
FEATURES: Nylon gear Ball Differential for smooth acceleration Heavy
duty Aluminum shaft and attached parts Anodized Purple INCLUDES: One
Pre-assembled Ball Diff REQUIRES: Mounting onto the Kyosho Mini-Z.
SPECS: Length: 66mm Diameter of shaft: 2mm Teeth: 42 |
|
In stock |
| Megatech 10T Delrin Pinion Gear 4.99
This is the
Optional 10T Delrin Pinion Gear for the Kyosho Mini-Z This mounts to
the motor and drives the main gear FEATURES: Gear is Delrin plastic
construction Gear base is purple aluminum Gear held onto motor by 3
x 3mm set screw INCLUDES: One Delrin 10T pinion gear |
|
In stock |
| Megatech 12T Delrin Pinion 4.99 This is the Megatech
12 tooth pinion gear. This is for the Kyosho Mini-Z. FEATURES:
Plastic pinion w/aluminum end, built in set screw for attaching to
motor pinion, aluminum is anodized purple. INCLUDES: One 12 Tooth
Pinion Gear. REQUIRES: Mounting into the Kyosho Mini-Z. SPECS:
Length: 9mm Teeth: 12 Diameter: 8mm (aluminum back) |
|
In stock |
| Megatech High Torq Motor 18.99.
This is the
Optional 25T High Torque Modified Motor for the Kyosho Mini-Z This
mounts to the chassis and drives the car FEATURES: Motor is Ball
Bearing, closed endbell type Motor leads presoldered to tabs Motor
can purple in color INCLUDES: One BB 25T High Torque motor REQUIRES:
Nothing COMMENTS: This replaces part stock #MZ-9 Manufacturer
suggests using 10T,11T,12T pinion gears with this motor for proper
gear ratios |
|
In stock |
| Megatech Modified 25T BB Motor 18.99
This is the
Optional 25T High Speed Modified Motor for the Kyosho Mini-Z This
mounts to the chassis and drives the car FEATURES: Motor is Ball
Bearing, closed endbell type Motor leads presoldered to tabs Motor
can purple in color INCLUDES: One BB 25T High Speed motor REQUIRES:
Nothing COMMENTS: This replaces part stock #MZ-9 Manufacturer
suggests using 7,8, or 9T pinion gears with this motor for proper
gear ratios |
|
In stock |
| Megatech Aluminum 2mm Flanged Lock Nut
9.99 This is
the Optional 2mm Aluminum Flanged lock Nut Set for the Kyosho Mini-Z
This mounts to the threaded axles and holds the wheels on FEATURES:
Lock nuts are Aluminum construction Anodized purple in color Flanged
design INCLUDES: Five Aluminum purple flanged lock nuts |
|
In stock |
| Megatech Aluminum Front/Rear Wide
Wheels 38.99 This
is the Optional Aluminum FR/RE Wide Wheels and Tires for the Kyosho
Mini-Z These mount to the axles and the car rides on them FEATURES:
Aluminum construction wheels Rubber construction on tires Wheels are
purple anodized in color INCLUDES: Four wheels and tires
|
|
In stock |
| Megatech Front/Rear Wide Racing SlicksFEATURES:
Rubber construction Medium compound / Semi sticky INCLUDES: Four
wide tires REQUIRES: wheels 13.99 |
|
In stock |
| Megatech Rubber V-Groove Tires 11.99
These are the
Optional V-Groove tires for the Kyosho Mini-Z Racers. FEATURES: Soft
rubber construction Black in color Special V-Groove tread design for
better traction INCLUDES: Four Black Rubber V-Groove tires REQUIRES:
Sliding the tires onto the rims. SPECS: Width: 11mm Outer Diameter:
27mm Inner Diameter: 20mm COMMENTS: These tires do "fit"
the stock Mini-Z wheels, but they are slightly wider than the
wheels. These tires are designed for the optional Megatech aluminum
wheels, MTCC1005 |
|
In stock |
| Megatech Aluminum Adjustable Shock &
Mount 53.99 This
is the Aptional Aluminum Adjustable Shock Set for the Kyosho Mini-Z.
This set mounts to the underside of the chassis and to the top of
the chassis. FEATURES: Purple anodized aluminum Yellow nylon ball
cups Knurled spring adjustment nuts Pre-assembled shocks and they
are attatched to the mounting bars INCLUDES: One pre-assembled shock
unit (2 shocks, 2 mounting bars) One mounting plate Six 2.6x4mm
mounting screws Two sleeves REQUIRES: Assembly onto Mini-Z SPECS:
Total shock length: 34mm (1.34") Shock diameter (at widest
point): 8.3mm (0.33") Mounting bar length (2 bars attached to
ball cups): 34mm (1.34") Length of mounting plate: 31.8mm
(1.25") COMMENTS: This part does not include instructions. To
install shocks, attach mounting plate to holes where antenna is
screwed on. The recessed holes should fit over those screw mounts.
Remove I-bar from underside of chassis and attach the bottom
mounting bar to the rear unit. Remove motor wires and feed them
through the shocks. Reattach I-bar. Reattach motor wires. Attach top
mounting bar to one of the three sets of threaded mounting holes. |
|
In stock |
| Megatech Aluminum Adj Shock/Damper
Mount 38.99 This
is the Optional Aluminum Adjustable Shock for the Kyosho Mini-Z This
mounts to the chassis and dampens the rear suspension FEATURES:
Shock is aluminum construction Purple anodized in color Threaded
shock body All aluminum mounting plates INCLUDES: One rear
adjustable shock One spare spring Three 2 x 4mm mounting screws |
|
In stock |
| Megatech Sway Bar Set 29.99 This is the Optional
Aluminum Sway Bar Set for the Kyosho Mini-Z Racers This part is
installed in the front of the vehicle FEATURES: Purple Anodized
Aluminum Different thickness sway plates INCLUDES: One anti-sway bar
One hard sway plate One medium sway plate One soft sway plate Six
2.6x4mm mounting screws Four washers REQUIRES: Assembly onto Mini-Z
COMMENTS: This sway bar is the part on the Mini-Z which supports the
bottoms of the front shock springs. This unit does not include
instructions. Assemble in the same fashion that the stock parts are
removed. |
|
In stock |
| Megatech H-Bar Fiber medium 3.49 This is the
Optional Carbon Fibre H-Bar Hard Tension for the Kyosho Mini-Z This
mounts to the chassis and the rear motor pod and helps support the
pod FEATURES: H-Bar is constructed of Carbon Fiber Medium tension at
0.8mm thickness INCLUDES: One Carbon Fiber 0.8mm Medium H-Bar |
|
In stock |
| Megatech 5mm Front Springs 4.99 These are optional
5mm Front Springs from Megatech for the Kyosho Mini-Z. These springs
are located on the front wheels. FEATURES: Silver and Gold colored
for quick identification. INCLUDES: Two Silver spings Two Gold
springs |
|
In stock |
![KYOD03[1].jpg (7394 bytes)](images/mini%20z/KYOD03[1].jpg)
![MTChassis].jpg (12458 bytes)](images/mini%20z/parts/MTChassis].jpg)
![DTXC1386[1].jpg (8335 bytes)](images/mini%20z/parts/DTXC1386[1].jpg)
